DWDM EDFA 40 channels Booster Optical Amplifier DWDM-EDFA-BA-O16
The DWDM-EDFA-BA-O16 booster amplifier is an easy-to-use and cost-efficient solution for DWMD fiber optic link amplification which operates at the transmission side of the link. It is designed to amplify aggregated optic input power for reach extension. Using dual-stage pump laser design and internal Gain Flattening Filter (GFF) to compensate the erbium fiber gain variation, it features high input power, low noise, and up to output power:16dBm. Software control is standard via an RS-232 interface for status monitoring and pump current adjustments.
Features
Booster Amplifier, carries whole C-Band 1528nm ~ 1561nm of 40 channel on metro DWDM distance extension or single wavelength distance extension application 100GHz channel spacing input power:-5~+10dBm output power:16dBmLow Noise Figure: Typical 4.5dBHigh Flatness: Typical 1dB19” 1RU rack enclosureSC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC connectors are availableSingle or dual 110VAC, 220VAC, 100~240VAC and/or -48VDC power supplyReliable 980nm and 1480nm pump lasers 10 years of operation life3 years warranty standardCompatible with Telecordia GR-1312-COREOEM is available
Highlights
Perfect Network Interface: Ethernet, RS-485 and RS-232 po Suppo Telnet APC (automatic power control) circuit for boosterGFF (gain flattening filters) assures a flat gain response across the entire C-band and input power rangeProvides automatic power shutdown when aggregate input falls below the thresholdEmploy the intelligent temperature control system, the fan is on when the module temperature over 45?, meanwhile it will stop as the temperature is under 40?, which makes sure the thermal stability and fan’s long life-time, meanwhile, the professional air flow design can also ensure the best temperature stabilitySNMP network management is to provide a graphical user interface (GUI) to control the modules in realistic windows that model the devices
Structure Example
NOTE:
The DWDM EDFA from Fiberinthebox including 1+2+3.
The DWDM EDFA from Fiberinthebox including 1+2+3.
Mechanical Structure
Picture Details
| Front-panel Details | |
 |
|
| Backpanel Details | |
 |
|
| Other Details | |
 |
 |
 |
 |
Specifications
| Parameter | Performance | Unit | ||
| Operating Wavelength | 40 channels | 1528~1561 | nm | |
| Input Power | Booster Amplifier | -5~+10 | dBm | |
| In-line Amplifier | -25~-10 | dBm | ||
| Pre-Amplifier | -35~-25 | dBm | ||
| Output Power | Max | 23 | dBm | |
| Noise Figure | Booster Amplifier | 4.5 | dB | |
| In-line Amplifier | 4.5 | dB | ||
| Pre-Amplifier | 4.5 | dB | ||
| Gain Flatness | 1 | dB | ||
| Isolation | Input | Min | 30 | dB |
| Output | Min | 30 | dB | |
| Polarization Dependent Gain(PDG) | Max | 0.5 | dB | |
| Power Consumption | Max | 15 | W | |
| Operating Temperature | 0~50 | ? | ||
| Operating Humidity | 10~85 | % | ||
| Storage Temperature | -40~70 | ? | ||
| ?: 110VAC, 220VAC, 100VAC~240VAC and -48VDC are optional | ||||
India
