6 dBm Output Single Channel Booster EDFA Optical Amplifier for SDH Networks
Fiberinthebox SDH-EDFA-BA-O6 booster amplifier designed for the Synchronous Digital Hierarchy (SDH) applications which installed after the optical transmitter to increase transmission distance for single wavelength optical module system. The device features wide input power range from 10dBm to +6dBm, output power up to 6dBm and low noise figure. It also includes RS-232 computer interface.
This Rack mountable amplifier work by default in constant signal-gain mode, but they can be configured to constant total output-power mode. These units are used in long-hauls transmission applications, especially for PDH, SDH, SONET and optical Ethernet transmission application. Its ease-of-use and performance make the SDH-EDFA-BA-xx series the ideal solution for Access and Metro optical networks.
Features
Service as a booster amplifier C-Band 1550nm Tunable output power: 6dBm Wide input power range: 10~+6dBmLow loise figure: typical is< 4.5dBConnectors: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC, ST/UPC and ST/APC connectors are availableGrade A include ASE noise filter/ ASE suppression filters. If you need it with Grade B, please contact at sales@fiberinthebox.com 1U 19” rack mount structure for easy installationAll performance compatible with BellcoreGR-1312-CORE requestUse for Access and Metro optical networksWorks with point-to-point applicationsHigh stability and reliability10 years of operation lifeOEM is available
Grade A V.S Grade B
Grade A power supply comes with Single or dual 110VAC, 220VAC, -48VDC, and/or 100V-240V; Grade B with Single or dual 220VAC, and/or-48VDCGrade A Serial interface comes with RS232, RS485; Grade B with RS232Grade A comes with 3 years warranty; Grade B with 1 year warranty
Highlights
Hot Swap Network Management Agent SNMP network management interface: RJ45Suppo Telnet ASE noise filter & ASE suppression filtersHigh Precise ACC (automatic constant current) Circuit as default,if you need other circuit, please contact at sales@fiberinthebox.com ATC (automatic temperature control) functionOffering status appearance and diagnosing fault with LCD
Mechanical Structure
Structure Example
NOTE:
The SDH EDFA from Fiberinthebox including 1+2+3.
The SDH EDFA from Fiberinthebox including 1+2+3.
Specifications
| Parameters | Symbol | Min | Typ | Max | Unit |
| Operation Wavelength | λc | 1530 | 1550 | 1562 | nm |
| Saturated output power (1) | Po | 20 | dBm | ||
| Input power (2) | Pi | -35 | 6 | dBm | |
| Gain | G | 20 | 32 | dB | |
| Noise Figure | NF | 4.5 | dB | ||
| Input Isolation | ISOi | 30 | dB | ||
| Output Isolation | ISOo | 30 | dB | ||
| Input pump leakage | PumpLin | -35 | dBm | ||
| Output pump leakage | PumpLout | -45 | -45 | dBm | |
| Return Loss | RL | -45 | dB | ||
| Polarization Dependent Gain | PDG | 0.3 | dB | ||
| PMD | PMD | 0.5 | ps | ||
| Operation Temperature | Tw | -5 | 60 | ? | |
| Storage Temperature | Ts | -40 | 80 | ? | |
| Humidity (3) | 10 | 85 | % | ||
| Power Voltage | Vps | 85/170 | 110/220 | 132/264 | VAC |
| Power Consumption | P | 18 | W | ||
| Serial interface | RS232, RS485 | ||||
| Power supply | 110VAC, 220 VAC, -48VDC, or 100V-240V | ||||
| Connectors | Simplex SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC available | ||||
| Warranty | 3 years | ||||
(1): Customer optional
(2): Pre-Amplifier: input power –35~-25dBm; Inline-Amplifier: input power –25~-10dBm, Booster: input power –10?+6dBm
(3): No condensation
(2): Pre-Amplifier: input power –35~-25dBm; Inline-Amplifier: input power –25~-10dBm, Booster: input power –10?+6dBm
(3): No condensation
India
