20dBm Output Single Channel In-Line EDFA Optical Amplifier for SDH Networks

20 dBm Output Single Channel In-Line EDFA Optical Amplifier for SDH Networks

Fiberinthebox SDH-EDFA-LA-O20 in-line amplifier designed for the Synchronous Digital Hierarchy (SDH) applications are specifically designed for single wavelength optical transmission system to replace traditional O-E-O repeaters. It operates in the middle of an optical link designed for optical amplification between two network nodes on the main optical link. The device features wide input power range from -25dBm to -10dBm, output power up to 20dBm and low noise figure. It also includes RS-232 computer interface.

This Rack mountable amplifier work by default in constant signal-gain mode, but they can be configured to constant total output-power mode. These units are used in long-hauls transmission applications, especially for PDH, SDH, SONET and optical Ethernet transmission application. Its ease-of-use and performance make the SDH-EDFA-LA-xx series the ideal solution for Access and Metro optical networks.

 

Features

Service as a In-Line amplifier C-Band 1550nm Tunable output power: 20dBm Wide input power range: -25dBm to -10dBmLow loise figure: typical is< 4.5dBConnectors: SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC, ST/UPC and ST/APC connectors are availableSingle or dual 110VAC, 220VAC, -48VDC, and/or 100V-240V power supply Serial interface comes with RS232, RS485 1U 19” rack mount structure for easy installationAll performance compatible with BellcoreGR-1312-CORE requestUse for Access and Metro optical networksWorks with point-to-point applicationsHigh stability and reliability3 years warranty10 years of operation lifeOEM is available

Highlights

Hot Swap Network Management Agent SNMP network management interface: RJ45Suppo Telnet ASE noise filter & ASE suppression filtersHigh Precise ACC (automatic constant current) Circuit as default,if you need other circuit, please contact at sales@fiberinthebox.com ATC (automatic temperature control) functionOffering status appearance and diagnosing fault with LCD

Mechanical Structure

Structure Example

NOTE:
The SDH EDFA from Fiberinthebox including 1+2+3.

Specifications

Parameters	Symbol	Min	Typ	Max	Unit
Operation Wavelength	λc	1530	1550	1562	nm
Saturated output power (1)	Po			20	dBm
Input power (2)	Pi	-35		6	dBm
Gain	G		20	32	dB
Noise Figure	NF		4.5		dB
Input Isolation	ISOi	30			dB
Output Isolation	ISOo	30			dB
Input pump leakage	PumpLin			-35	dBm
Output pump leakage	PumpLout	-45		-45	dBm
Return Loss	RL			-45	dB
Polarization Dependent Gain	PDG			0.3	dB
PMD	PMD			0.5	ps
Operation Temperature	Tw	-5		60	?
Storage Temperature	Ts	-40		80	?
Humidity (3)		10		85	%
Power Voltage	Vps	85/170	110/220	132/264	VAC
Power Consumption	P			18	W
Serial interface	RS232, RS485
Power supply	110VAC, 220 VAC, -48VDC, or 100V-240V
Connectors	Simplex SC/UPC, SC/APC, FC/UPC, FC/APC, LC/UPC, LC/APC , ST/UPC and ST/APC available
Warranty	3 years

(1): Customer optional
(2): Pre-Amplifier: input power –35~-25dBm; Inline-Amplifier: input power –25~-10dBm, Booster: input power –10?+6dBm
(3): No condensation