Product introduction
FS-E624T is a follow the IEEE802.3ah and the People’s Republic of China communication industry standard (YD/T 1475-2006) OLT equipment, full CTC2.0/2.1 suppo , automatic discovery and compatible with all ONU vendors. Efficient EPON solutions.
PON transmission rate of FS-E624T OLT suppo 1.25Gbps, efficient bandwidth utilization and Ethernet service suppo capability to help operators to provide quality service and reliable guarantee for their users.
Up to 1:64 of optical divide ratio, mixing networking suppo different types of ONU, allows the operator's investment is minimised.
FS-E624T uses the advanced technology, the Ethernet service with strong function and QoS guarantees, and suppo SLA DBA.
The main advantage of FS-E624T
FS-E624T is a market demand for optical network equipment at present, a OLT suppo s 4 EPON system, has the following advantages:
By EPON: FS-E624T followed IEEE802.3ah and the people's Republic of China communication industry standard (YD/T 1475-2006). System capacity: FS-E624T modular PON card configuration also suppo s 4 EPON system, can suppo up to 256 user terminal equipment (ONU), suppo for 1:64 optical divide ratio.
Connected interface: flexible design suppo the combination of different network interface types, according to the choice of optical or electrical network.
Equipment size: 1U equipment occupy the room space is small, less power consumption, reduce business operating costs.
Trunk optical fiber protection: FS-E624T suppo in the fiber failure link automatic protection switching.
High reliability, suppo for dual power supply.
The main characteristics of FS-E624T
Adopts point to multipoint network topology, effectively collect users dispersion of Ethernet, and convergence in the metropolitan area network node, uses GE interface to connect the upper equipment, to achieve a smooth connected with the existing network.
Dynamic bandwidth allocation mechanism (DBA) that will be more reasonable to share the 1Gbps bandwidth of all users, achieve reliable guaranteed quality of service (QoS).
Redundant interconnection is RSTP spanning tree protection functions of OLT and backbone network fast. High reliability ring network security EAPS rapid ring protection protocol 50ms.
Suppo IGMP multicast, effective use of broadband. Suppo VLAN multicast.
Suppo IPTV, voice and data of three heavy plays.
rich OAM function, including configuration, alarm, performance monitoring, fault isolation and security management, and suppo for CLI and GUI two kinds of management modes, easy to use.
Technical parameters
Attribute |
FS-E624T |
System capacity |
The highest 1:64 ratio
|
Po |
6 GE interface (2 Gigabit RJ45 po s, 2 Combo po s, 2 gigabit optical)
|
PON po |
Uplink and downlink symmetrical 1Gbps transmission rate Security: the ONU authentication mechanism Network coverage radius: 30 km
|
Follow the standard |
IEEE802.3ah
|
Quality of service |
Backpressure flow control (half duplex) |
VLAN |
Po based VLAN |
Multicast |
IGMP v1/v2/v3 |
Reliability |
Unidirectional link detection protocol, to prevent the survival tree ring |
Network security |
Limit the maximum number of users per po |
Configuration management |
CLI, Web, SNMP, TELNET, cluster and other management mode. |
Physical prope y |
442mm(W) x315mm(D) x 44mm(H) |
Environmental requirements |
Working environment: 0 ℃ ~ 55 ℃; 10% ~ 85% no condensation |
Power supply |
Input voltage: AC100 ~ 240V, 47 ~ 63Hz input frequency |
Ordering information
Type |
Describe |
FS-E624T |
4 PON OLT devices (1 CONSOLE po , 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP po s, 2 Gigabit po ; suppo AC90-264V power supply, single power input, 19 inch standard rack, fan heat)
|
FS-E624T-DC |
4 PON OLT devices (1 CONSOLE po , 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP po s, 2 Gigabit po ; suppo DC36~72V, single power input, 19 inch standard rack, cooling fan)
|
FS-E624T-2AC |
4 PON OLT devices (1 CONSOLE po , 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP po s, 2 Gigabit po ; suppo AC90-264V power supply, dual power input, 19 inch standard rack, fan heat)
|
FS-E624T-2DC |
4 PON OLT devices (1 CONSOLE po , 1 out of band management of 10/100M Ethernet, 4 fixed PON (not including OLT SFP optical module), 2 Gigabit combo, 2 Gigabit SFP po s, 2 Gigabit po ; suppo DC36~72V, dual power input, 19 inch standard rack, cooling fan)
|
OLT-GSFP-20 |
The OLT SFP module, 20km, 1.25G, TX at 1490nm, RX at the wavelength of 1310nm, SC interface |
OLT-GSFP-20+ |
The OLT SFP module, 20km, 1.25G, TX at 1490nm, RX at the wavelength of 1310nm, SC interface, suppo for DDMI optical power detection function |
Technical parameters
Attribute |
FS-E624T |
System capacity |
The highest 1:64 ratio
|
Port |
6 GE interface (2 Gigabit RJ45 ports, 2 Combo ports, 2 gigabit optical)
|
PON port |
Uplink and downlink symmetrical 1Gbps transmission rate Security: the ONU authentication mechanism Network coverage radius: 30 km
|
Follow the standard |
IEEE802.3ah
|
Quality of service |
Backpressure flow control (half duplex) |
VLAN |
Port based VLAN |
Multicast |
IGMP v1/v2/v3 |
Reliability |
Unidirectional link detection protocol, to prevent the survival tree ring |
Network security |
Limit the maximum number of users per port |
Configuration management |
CLI, Web, SNMP, TELNET, cluster and other management mode. |
Physical property |
442mm(W) x315mm(D) x 44mm(H) |
Environmental requirements |
Working environment: 0 ℃ ~ 55 ℃; 10% ~ 85% no condensation |
Power supply |
Input voltage: AC100 ~ 240V, 47 ~ 63Hz input frequency |