FITB-OEO800-EDFA Multiple Wavelength Series
FITB-OEO800-EDFA is a kind of erbium-doped optical fiber amplifier. It can regenerate optical signals of multiple wavelengths without conversion from optical to electrical to optical, which prolongs the transmission distance. Wavelength division multiplexing can be realized by using C/DWDM multiplexer or de-multiplexer, which specially applies to long-haul backbone network, metropolitan area network, access network as well as various SDH/PDH transmission systems.
Key Features
The gain can be adjusted if required It is with high gain, low noise and good gain flatness ACC, APC and AGC are optional It suppo s amplifcation on the two stages, OADM or DCM modules can be accessed in the middle It is with small-size and modular design and suppo s hot swapParameters of graphical interfaces can be set and viewedBA: Power Amplifier PA: Preamplifier
Specification
Parameter | Minimum Value | Typical Value | Maximum Value | Unit | |
Operating Wavelength | 16 Channels | 1546 | 1561 | nm | |
32 Channels | 1535 | 1562 | |||
40 Channels | 1528 | 1565 | |||
Input Power | Power Amplifier (OBA) | -14 | -5 | dBm | |
Preamplifier (OPA) | -38 | -5 | |||
Output Power | 23 | dBm | |||
Gain | 14 | 33 | dB | ||
Noise Index | Power Amplifier (OBA) | 5.0 | dB | ||
Preamplifier (OPA) | 4.5 | ||||
Gain Flatness | 1.0 | dB |
Typical Application Cases of FITB-OEO800 Series
Site-to-Site Standard Transmission
Site-to-Site Ultra-Long-Haul Transmission With Repeater
Ultra-Long-Haul Repeaterless Transmission
Unidirectional WDM Transmission
Specifications
Parameter | Minimum Value | Typical Value | Maximum Value | Unit | |
Operating Wavelength | 16 Channels | 1546 | 1561 | nm | |
32 Channels | 1535 | 1562 | |||
40 Channels | 1528 | 1565 | |||
Input Power | Power Amplifier (OBA) | -14 | -5 | dBm | |
Preamplifier (OPA) | -38 | -5 | |||
Output Power | 23 | dBm | |||
Gain | 14 | 33 | dB | ||
Noise Index | Power Amplifier (OBA) | 5.0 | dB | ||
Preamplifier (OPA) | 4.5 | ||||
Gain Flatness | 1.0 | dB |