4 Fibers Multimode 50/125 10G OM3 Indoor/Outdoor Distribution Plenum Fiber Optical Cable
This Fiberinthebox Distribution Plenum Rate Fiber Optic Cable is composed of 2 to 24 colored tight buffers, water blocking aramid yarn, and a UV resistant black PVC outer jacket. It used in trunking, LAN and distribution applications where small size, lightweight, and versatile installation capability are required for ducts, plenums, and air handing spaces. It’s ideal configuration for single termination point requiring multiple fibers. This new multimode optical fiber allows designers, installers and operators of enterprise networks (including local area networks, data centers and industrial networks) to use multimode optical fiber in a package that is easier to handle and install.
Features
High performance components and constructionHigh specific strength-to-weight ratio and compact cable design for limited conduit space and tight bends in long cable pulls Helically stranded core for flexibility, survival in difficult installations, and mechanical protection for the fibers Lower installed cost High performance tight-buffered coating on each fiber for environmental and mechanical protection High crush resistance may eliminate the need for innerduct 900μm buffer eliminates the need for costly and time-consuming installation of fanout kits or pigtail splices because connectors terminate directly to the fiber
Indoor/Outdoor
Indoor/Outdoor plenum cables eliminate the need for costly cable transitions in different installation environmentsCable materials are UV, water and fungus resistant Higher fiber counts available than similar cables available by others in subgrouped configuration Jacket is highly chemical resistant for installation in harsh industrial environments Interlocking armor can be applied to cables as an alternative to conduit installation Can be installed outside and in plenum or riser pathways inside, eliminating the need to transition cable types between environments2 to 72 fiber configuration is smaller and lighter than comparable sub-grouped cables, which is ideal for installation in areas with limited space or tight bends
Applications
Used in trunking, LAN and distribution applications where small size, lightweight, and versatile installation capability are required for ducts, plenums, and air handing spaces Ideal configuration for a single termination point requiring multiple fibers
Specifications
|
Fiber Count
|
4
|
|
Fiber Type
|
Multimode 50/125 10G OM3 Plenum
|
|
Operating Temperature
|
-40℃ to +85℃
|
|
Storage Temperature
|
-40℃ to +70℃
|
|
Installation Temperature
|
0℃ to +60℃
|
|
Flame Retardancy
|
UL Listed Type OFNP(ANSI/NFPA 262) and FT6(CSA C22.2 No.232)
|
|
Crush Resistance
|
1,500 N/cm
|
|
Impact Resistance
|
Per ICEA-S-83-596
|
|
Flex Resustance
|
1,000 cycles
|
|
Diameter
|
4.8 mm (0.19 in)
|
|
Weight
|
24 kg/km (16 lbs/1,000ft)
|
|
Tensile Load-Installation
|
1400 N (310 lbs)
|
|
Tensile Load-Operational
|
450 N(100 lbs)
|
|
Minimum Bend Radius-Installation
|
7.2 cm (2.8 in)
|
|
Minimum Bend Radius-Long Term
|
7.2 cm (2.8 in)
|
Custom Information
Fiber Coloring: blue, orange, green, brown, slate, white, red, black, yellow, purple, rose, aqua or custom specified Fiber Type: Single-mode, Multimode Sheath Color: black, blue, orange, green, brown, slate, white, red, yellow, purple, rose, aqua or custom specified Sheath Material: PE, AT or custom specified Cable Length: Custom specified
India
