Fluke FIBR-1-SHOT Fiber OneShot Only

Overview

Fiber OneShot PRO takes the complexity out of singlemode fiber testing by analyzing fiber links and measuring faults up to 15 miles in less than five seconds.
Whether you are troubleshooting FTTx, Hybrid Fiber Coax (HFC), fiber links between Central Offices, or working on regional or rural access networks, Fiber OneShot PRO is your first response to fiber trouble.
The simple, one-button test feature means no training and can cut the average job time by 30 percent.
This new class of tester fills the gap between a VFL and OTDR because it easily and quickly locates lossy connections, high-loss faults and breaks in a single mode fiber network.
This frontline fiber troubleshooter is an essential tool for anyone working with single mode fiber.

Features

Durable to survive drops, vibrations and impacts Output wavelengths 1310 nm ± 25 nm Adjustable dB limit mode Adjustable index of refraction (I.O.R.) mode Adjustable APC/UPC mode Adjustable feet/metric mode Self calibrating, factory calibration not required Removable/cleanable SC adapter Quick change battery compa ment, no screwdriver needed Field-replaceable (2) AA batteries Extended battery life, up to 5,000 tests Battery life gauge Auto shut down to extend battery life Extra large liquid crystal display (LCD) with programmable backlight for use in any environment Essential fiber test results displayed numerically, no interpretation needed

Benefits that increase your productivity

New CheckActive™ feature: ale s the user if an optical signal is on the fiber Instant-on: no boot/load time Measure the length to a break, end, di y end face/bulkhead, or reflective event quickly and accurately from 0 – 9,999 feet (note* 0 – 6,000 meters displayed in metric mode) No dead zone: locate fiber faults at 1-meter Single button testing: essential fiber testing in just a few seconds

Picture Detail

Specifications

are typical.
Dimensions	17.5 cm H 7.8 cm W 3.8 cm D 0.35 kg weight including batteries
Operating temperature with the battery	0ºC to 50ºC
Non-operating temperature	-20ºC to 60ºC
Operating relative humidity	95% (10ºC to 35ºC)
	75% (35ºC to 40ºC)
(without condensation)	uncontrolled < 10ºC
Vibration	Random, 5 Hz to 500 Hz, MIL-PRF- 28800F CLASS 2
Shock	1-metre drop test
Altitude	9,842 feet/3000 metres
EMC	EN 61326-1:2004
Battery type	2 AA alkaline batteries (no battery charger)
Battery life	More than 1500 tests (typical)
Laser safety	Class 1 CDRH
	Complies to EN 60825-2
LCD type	Backlit black and white (segments)
Index of refraction range	1.45 to 1.5 (factory default is 1.468)
Auto turnoff	Automatically turns off after 5 minutes if no keys are pressed.
	Backlight turns off first.
Factory calibration interval	None
Output wavelengths	1550 nm ± 20 nm at 25ºC
Laser classification	Class 1 CDRH Complies to EN 60825-2
Maximum distance	75,459 feet or more than 23,000 metres
Maximum number of incidents shown	9
Distance accuracy	± (1 m + 1% x length) for reflective incidents1
	± (3 m + 1% x length) for non-reflective incidents2
Testing speed	5 seconds typical testing time
Connector	Removable/cleanable SC adapter, UPC polish
Fiber types tested	9/125 μm singlemode
Detection of reflective incidents3	-45 dB default threshold (user-selectable: -24 dB to -62 dB in 1 dB increments)
Maximum reflectance measurement	-24 dB
Detection of loss incidents4	1.5 dB default threshold
Bulkhead quality	If no fiber is attached or if the connector is dirty, the troubleshooter displays 0 m or 0 ft.
Live fiber detection	Detects optical signals from 1250 nm to 1625 nm and shows ACTIVE LINE if a signal is  there.Looks for a signal every 3 seconds after the first detection. +7 dB maximum input power.
	Conforms to relevant European Union directives
	Conforms to relevant Australian standards
	Listed by the Canadian Standards Association CSA C22.2 No. 61010.1.04
	Conforms to FCC Rules, Part A, Class A
1  ± user-configurable Index of Refraction (IOR) error ± the incident location error.
2  ± user-configurable Index of Refraction (IOR) error ± the incident location error.
3  Detects the location of an incident that has a reflectance larger than -62 dB. Detects incidents >2 m after the bulkhead connector  when the bulkhead reflectance is <35 dB. Detects incidents >3 m after an incident when the incident reflectance is <35 dB.
4  Detects incidents >10 m after the bulkhead connector or any prior incident when the bulkhead reflectance is <-35 dB  and the reflectance of any prior incident is  <-35 dB. The maximum link loss prior to the incident is <7 dB.