1000Base Dual Fiber 1310nm 2km SC Connector 1SC+1RJ45 Port Gigabit Fiber Media Converter

Gigabit Fiber Media Conve er 1000Base Dual Fiber 1310nm 2km SC 1SC+1RJ45

Media conve ers can be used anywhere in the network to integrate newer technology with existing equipment to suppo new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media conve ers can extend the productive life of the existing cabling as well as the active equipment.

Fiberinthebox.COM supply 10/100Base Ethernet Fiber Media Conve ers, 1000Base Gigabit Fiber Media Conve er,SFP Fiber Media Conve er, Options in singlemode dual fiber, multimode dual fiber and singlemode single fiber. We also supply Media Cove er Chassis, like 14 slot media conve er chassis and 16 slot media conve er chassis, used to manage the various media conve ers.

Features

AutoCross™: Automatically detects and configures the twisted pair po on the conve er to the correct MDI or MDI-X configuration. Link Pass Through: Link Pass Through is a troubleshooting feature that allows the media conve er to monitor both the fiber and copper RX po s for loss of signal. Automatic Link Restoration: The medio conve ers will automatically re-establish link in all network conditions. Selectable speed setting: The conve er can be set to 10Mbps or 100Mbps. Both copper and fiber po s are automatically set to the same speed. Devices connect to duplex mode of link pa ner.

Key Features

1000Mbps auto-negotiation Suppo s IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control Suppo s MAC self-learning Standards: IEEE802.3, IEEE802.3u, IEEE802.3x, 10/100Base-TX, 100Base-FX, 10/100/1000Base-TX, 1000Base-FX/LX Po base VLAN LED status of Link, activity, Full/half duplex, speed and power on diagnostic function Extremely low power consumption and low heat Reliable and stable performance

Specifications

UTP Po : 1-po RJ45 UTP Rate: 1000Mbps Fiber Po : Duplex SC, ST, FC available Fiber Rate: 1000Mbps Fiber Wavelength: 1310nm Fiber Mode: Multimode Distance: 2km LED Indicator: TX LINK, FX LINK, TX ACT, FX ACT, PWR, FDX. Power Supply: External or built-in Working Temperature: -20~75°C Relative Humidity: 5%~90%Dimension (mm): 26*70*95 （with external power), 30*110*140 (with built-in power)