RS-422/RS-485 optical fiber modem work on 1310nm wavelength using Duplex multi-mode optical fibers, SC, ST, FC optical connectors for choice.
RS-485/RS-422 interface optic fiber modem is the best choice to connect RTU to HOST or SCADA controllers via multi-mode or single-mode optical fiber. The RS422/RS485 fiber conve er can extend serial transmission distance up to 2km (multi-mode fiber) or up to 20km (single-mode fiber).
With resistant to the effects of lightning strikes, power surges and other electromagnetic interference, the RS-485/RS-422 optical fiberal modem provides a reliable data network.
Note: the RS-422/RS-485 interfaces cannot be used on the same unit at the same time to conve to fiber.
The RS-485/RS-422 optical fiber modem incorporates a method for automatically detecting the serial signal baud rate by hardware (Auto Baud Rate Detection). This is an extremely convenient feature for the user. Even if device baud rate is changed, the signal will still be transmitted through the RS-485/RS-422 to fiber conve er without any problem.
Fiberinthebox RS422/RS485 interfaces fiber modem meet EIA/RS-422 and RS-485 transmission standards at data rates up to 500kb/s.
Fiberinthebox can offer:
RS-232 Serial Optic Fiber Modem, RS-422 Serial Optic Fiber Modem, RS-485 Serial Optic Fiber Modem, RS-485/422 Serial Optic Fiber Modem, RS-485/422/232 Serial Optic Fiber Modem.Those above Serial Optic Fiber Modem can work on 1310nm wavelength using duplex single-mode fibers, duplex multi-mode fibers or simplex single-mode fiber. And they have ST, FC or SC connectors for choice.
Key Features
Working wavelength: 1310nm This modems are connected with duplex multi-mode fibers Suppo RS-485/RS-422 interface RS-422/485 po suppo 32 node ( customers can choice handtailor 128 Node) Suppo EIA RS-485, RS-422 standard Asynchronous point to point rate up to 500kb/s (RS-422 & RS-485) Suppo 5V DC Volt input, consumption 2W 1500W surge protection, 15KV static protection Auto test signal rate, zero delay auto transmit
Transmit distance: RS-422/485 po 1.5km, optical po multi-mode 2km, single-mode 20km
Applications
.jpg)
Item Information
Manufacturer: Fiberinthebox Co., Ltd Type: RS-422/485 to Fiber Conve er Enclosure: External Power supply Package: paper box Order includes: 1 X USER MANUAL 2 X Power Supply, +12 Volt, 1.5 Amp, Stripped and Tinned Leads 2 X ITEMS--- RS422/RS485 interfaces fiber modem transmitter & receiver
View Item Pictures
.jpg)
This is the inside packaging picture. The adapter is been put on the sublayer while the unit in upper layer.
.jpg)
.jpg)
a. The left picture is the picture of our package, the goods are surrounded with white foam for protection.
b. The right one is the picture of our package box. Size: 280mm(L) *180mm(W)* 90mm(H).
b. The right one is the picture of our package box. Size: 280mm(L) *180mm(W)* 90mm(H).
.jpg)
c. This is a piece of product picture with Fiberinthebox Logo, we will send you the product like this as default if no special requirement. If you want to be with your own Logo, just tell us.
Specifications
| Standard | EIA RS-485/RS422 standard |
| RS422 signal | R+, R-, T+, T-, GND |
| RS-485 signal | D+, D-, GND |
| Fiber signal | IN, OUT |
| Working format | Asynchronism, point to point or multi-point |
| Direction control | Adopt automatic send data control, auto distinguish and control data transfer direction |
| Band rate | 0-500Kbps, auto serial band rate test |
| Fiber wavelength | Multi-mode Double-fiber 1310nm |
| Electric port transmission | RS-485/422 port 1200M |
| Optic port transmission | Multi-mode Double-fiber 2KM |
| Loading | RS-485/422 port support 32 port loop environment (or hand tailor 128 point) |
| Interface protection | 600W surge protection, 15KV static protection |
| Electricity connector | 8 terminal block |
| Dimension | 100mm*691mm*22mm |
| Input Power | 5DC |
| Consumption | 2W |
| Operating temperature | 0 to 50°C |
| Storage temperature | -40 to +80°C |
| Relative humidity | 5% to 90% (25°C no condense) |
India
