Ethernet Fiber Media Conve er 10/100M Dual Fiber 1310nm 2km SC 1SC+1RJ45
Media conve ers can be used anywhere in the network to integrate newer technology with existing equipment to suppo new applications, technologies and future growth. Instead of costly, across-the-board upgrades, media conve ers can extend the productive life of the existing cabling as well as the active equipment.
Fiberinthebox.COM supply 10/100Base Ethernet Fiber Media Conve ers, 1000Base Gigabit Fiber Media Conve er,SFP Fiber Media Conve er, Options in singlemode dual fiber, multimode dual fiber and singlemode single fiber. We also supply Media Cove er Chassis, like 14 slot media conve er chassis and 16 slot media conve er chassis, used to manage the various media conve ers.
Features
AutoCross™: Automatically detects and configures the twisted pair po on the conve er to the correct MDI or MDI-X configuration. Link Pass Through: Link Pass Through is a troubleshooting feature that allows the media conve er to monitor both the fiber and copper RX po s for loss of signal. Automatic Link Restoration: The medio conve ers will automatically re-establish link in all network conditions. Selectable speed setting: The conve er can be set to 10Mbps or 100Mbps. Both copper and fiber po s are automatically set to the same speed. Devices connect to duplex mode of link pa ner.
Key Features
10/100Mbps auto-negotiation Suppo s IEEE 802.3x full-duplex flow control and back pressure half-duplex flow control Suppo s MAC self-learning Standards: IEEE802.3, IEEE802.3u, IEEE802.3x, 10/100Base-TX, 100Base-FX, 10/100/1000Base-TX, 1000Base-FX/LX Po base VLAN LED status of Link, activity, Full/half duplex, speed and power on diagnostic function Extremely low power consumption and low heat Reliable and stable performance
Applications:
Extend Ethernet Network Distances
It use the 10BASE-T to 10BASE-FL speed setting (back-to-back) to extend the distance between two 10BASE-T devices up to 100km. using single mode fiber without a repeater.
Extend Fast Ethernet Network Distances
It use the 100BASE-TX to 100BASE-FX setting to extend the distance between any two 100BASE-TX devices up to 100km. using single mode fiber. Or interface directly with a 100BASE-FX compliant po on any device to provide a 100BASE-TX po interface.
Specifications
UTP Po : 1-po RJ45 UTP Rate: 10/100Mbps Fiber Po : Duplex SC, ST, FC available Fiber Rate: 100Mbps Fiber Wavelength: 1310nm Fiber Mode: Multimode Distance: 2km LED Indicator: TX LINK, FX LINK, TX ACT, FX ACT, PWR, FDX. Power Supply: External or built-in Working Temperature: -20℃~75℃ Relative Humidity: 5%~90%Dimension (mm): 26*70*95 （with external power), 30*110*140 (with built-in power)
India
