Dual 1x2 Mechanical Fiber Optic Switches/Dual 1x2 Optical Switch, Non-Latching,Single-mode
Fiberinthebox Dual 1x2 Non-Latching Mechanical Fiber Optic Switch is designed for use in optical fiber communication networks and measurement instruments. The switch consists of two po s that selectively transmits, redirects, or blocks optical power in a optical fiber transmission line. The optical switch must be actuated to select or change between two states. Fu hermore, for the Non-Latching type, it only takes an electrical pulse width with duration ≧20msec to change the state. As a result, it consumes low electric energy to operate the optical switch. Fiberinthebox Dual 1x2 Non-Latching Mechanical Fiber Optic Switch fully complies with RoHS Directive 2002/95/EC (2008/385/EC).
Fiberinthebox offers cost-effective standards-based Dual 1x2 Non-Latching Mechanical Fiber Optic Switch. As a 3rd pa y OEM manufacturer, our Dual 1x2 Non-Latching Mechanical Fiber Optic Switch is delivered to worldwide from our factory directly. All our Dual 1x2 Non-Latching Mechanical Fiber Optic Switch are based on thin film filter technology and metal bonding micro optics packaging and our Dual 1x2 Non-Latching Mechanical Fiber Optic Switches are tested in-house prior to shipment to guarantee that they will arrive in perfect physical and working condition. For more information about Dual 1x2 Non-Latching Mechanical Fiber Optic Switch, please contact us at sales@fiberinthebox.com .
Fiberinthebox offers cost-effective standards-based Dual 1x2 Non-Latching Mechanical Fiber Optic Switch. As a 3rd pa y OEM manufacturer, our Dual 1x2 Non-Latching Mechanical Fiber Optic Switch is delivered to worldwide from our factory directly. All our Dual 1x2 Non-Latching Mechanical Fiber Optic Switch are based on thin film filter technology and metal bonding micro optics packaging and our Dual 1x2 Non-Latching Mechanical Fiber Optic Switches are tested in-house prior to shipment to guarantee that they will arrive in perfect physical and working condition. For more information about Dual 1x2 Non-Latching Mechanical Fiber Optic Switch, please contact us at sales@fiberinthebox.com .
Features
Low Inse ion Loss Wide Wavelength Range Low Crosstalk High Stability, High Reliability Epoxy-free on Optical Path Latching and Non-latching
Applications
Specifications
| Wavelength Range | nm | 670~980 | 1260~1650 |
| Testing Wavelength | nm | 670/785/850/980 | 1310/1490/1550/1625/1650 |
| Inse ion Loss | dB | Typ:0.8 Max:1.2 | Typ:0.5 Max:1.0 |
| Return Loss | dB | MM ≥ 30 SM ≥ 50 | |
| Crosstalk | dB | MM≥35 SM≥55 | |
| PDL | dB | ≤ 0.05 | |
| WDL | dB | ≤ 0.25 | |
| TDL | dB | ≤ 0.25 | |
| Repeatability | dB | ≤± 0.02 | |
| Power supply | v | 3.0 or 5.0 | |
| Lifetime | times | ≥ 10 7 | |
| Switch Time | ms | ≤ 8 | |
| Transmission Power | mW | ≤ 500 | |
| Operating Temperature | ° C | -20~+70 | |
| Storage Temperature | ° C | -40~+85 | |
| Dimension | mm | (L)27.0 × (W)12.6 × (H)8.0( ± 0.2mm) customization is available. | |
Note:
1. All parameters are for device without connectors.
2.Special specifications can be customized according to customer requirements.
1. All parameters are for device without connectors.
2.Special specifications can be customized according to customer requirements.
Optical Route:
.jpg)
Dimension:
.jpg)
Pins:
| Control Model | Optical Path | Electri Drive | Status Sensor | |||||||
| D1×2 | Light Pin | 1 | 5 | 6 | 10 | 2~3 | 3~4 | 7~8 | 8~9 | |
| Latching | P1-P2 | P1'-P2' | -- | -- | GND | V+ | Close | Open | Open | Close |
| P1-P3 | P1'-P3' | V+ | GND | -- | -- | Open | Close | Close | Open | |
| Non-latching | P1-P2 | P1'-P2' | -- | -- | -- | -- | Close | Open | Open | Close |
| P1-P3 | P1'-P3' | V+ | -- | -- | GND | Open | Close | Close | Open | |
Optical Route:
| Specification | Voltage | Current | Resistance |
| 5V latching | 4.5~5.5 | 36~44mA | 125Ω |
| 5V non-latching | 4.5~5.5 | 26~32mA | 175Ω |
| 3V latching | 2.7~3.3 | 54~66mA | 50Ω |
| 3V non-latching | 2.7~3.3 | 39~47mA | 70Ω |
India
