Fiberinthebox

125M~4.25G Optical-Electrical-Optical/OEO Protocol-transparent Converter/Transponder/3R Repeater

SKU#:FITB74195YOS
Model#: FITB-OEO-3R-C-004
Out of stock

Fiberinthebox 125M~4.25G OEO Transponder is for Fast Ethernet, STS-3/STM-1, ESCON/SBCON, STS-12/STM-4, 1×Fiber Channel, Gigabit Ethernet, 2×Fiber Channel, STS-48/STM-16, 2.5 InfiniBand, 4×Fiber Channel applications.

Attention: This item is card type, SFP to/from SFP po .

Features
Suppo 2U Rack (16 Slots) and independent use as standalone unit Suppo network management (Web SNMP, Console)
Suppo in-band management Suppo ITUT prescribed DWDM/CWDM wavelength
Transmission rate:125Mbps~4.25Gbps 3R function
Suppo Jumbo Frame Transparent Transpo and very low delay
Suppo DMI function for SFP fiber module Suppo Loopback test function
Suppo PRBS Generator and checker Suppo hot plugging
Easy installation Full State Led display
Specifications
Equipment function: 3R Repeater / Extender / Media conve er
Access Type / Transmission Speed
Fast Ethernet: 125Mbps STS-3/STM-1: 155.52Mbps
ESCON/SBCON: 200Mbps STS-12/STM-4: 622.08Mbps
1×Fiber Channel: 1.0625Gbps Gigabit Ethernet: 1.25Gbps
2×Fiber Channel: 2.125Gbps STS-48/STM-16: 2.48832Gbps
2.5 InfiniBand or PCI Express: 2.5Gbps 4×Fiber Channel: 4.25Gbps)
Interface Type: SFP to/from SFP
Transmission Distance:
Up to SFP module (Max 80Km) Local SFP: Suppo SFP/CWDM/DWDM,Specific optical parameters please refer different modules's parameters
Remote SFP: Suppo SFP/CWDM/DWDM,Specific optical parameters please refer different modules's parameters  
Network management information: Card type information
SFP+ or XFP fiber module detection SFP+ or XFP fiber module DMI function (Temperature, Voltage, Optical power)
Link status detector Enable/Disabled Loopback test function
Enable/Disable PRBS Generator and checker function Rate select (10Gbase-Lan or Wan)
Remote card's status monitor (only in pairs) Card type information
Power requirement:
Rack-mountable: AC 85~220V OR DC -48V dual-supply, optional Standalone: AC 220V OR -48V
Power consumption: ≤3W  
Work Environment:
Operating Temp: 0~ 50 ℃ Storage Temp: -10~ 70 ℃
Humidity: 5%~90% (non-condensing)  
Dimension:
Card: 11.5mm (W) × 78mm (D) Standalone: 156mm (W) × 128mm (D) × 32mm (H)