Description
This optical fiber protection sleeve is used for protecting and suppo ing the fusion splice point. It is
made up of cross linked polyolefin heat-shrinkable tubes, hot melt tubes and Stainless steel needle,
which is specifically designed for the protection of optical fiberal closure.
Features
Protect connection point, improve the mechanical strength, it is most reliable way to protect the fusion.
Easy to operate, reducing the risk of fiber damage during installation
Transparent tube, it is easy to see the status of optical fiberal closure
Min. shrinks temperature: 120°C, shrink very fast and very easy to installation
Work temperature high (-55°C~100°C), widely used
Ordering Information
| Type | Length of tube | Hot-melt tube | Steel needle | |||
| After recover | Length | Inside dia | Length | Inside dia | Length | |
| FS-1560 | 3 | 60 | 1.3 | 60 | 1.5 | 58 |
| FS-1545 | 3 | 45 | 1.3 | 45 | 1.5 | 40 |
| FS-1260 | 2.5 | 60 | 1.3 | 61 | 1.2 | 55 |
| FS-1240 | 2.5 | 40 | 1.3 | 40 | 1.2 | 36 |
Quantity: 100pcs/pkg
Note: We also provide this kind of protection sleeves with 1000pcs/pkg and good price.
Fiber optic splice protection sleeves are used for optical fiber fusion protection, it can protecting and suppo ing the fusion splice point. Fiberinthebox.com now provides different sizes and materials of this kind of products. And if you can not find the optical fiber splice sleeves you needing on our website, welcome to contact us, we will give you a reasonable suggestion
Specifications
|
Item |
Test method |
Performance |
|
Temperature |
IEC216 |
-55°C~100°C |
|
Tensile strength |
ASTM D 2671 |
18MPa |
|
Elongation at break |
ASTM D 2671 |
700% |
|
Density |
ISO R1183D |
0.94g/cm3 |
|
Dielectric strength |
IEC243 |
25kV/mm |
|
Volume resistance |
IEC243 |
1015Ω |
|
Dielectric constant |
IEC243 |
2.5 |
|
Longitudinal change |
ASTM D 2671 |
±5% |
|
Eccentricity |
ASTM D 2671 |
105 |
India
