2M E1/Datacom Transmission Analyzer FS1200A

FS1200 Series 2M Transmission Analyzers is mainly used for measuring of the error rate of data communication and for the analysis of line fault and causes, and very suitable for the parameter measurement and routine maintenance testing of 2M system, N×64K communication channels.The model FS1200A is the simplest one in these three models, it only have a few basic functions, and did not own the datacom measurement, you can find their contrast in the specification.

 

1. English menu, Large screen, Easy operation
2. Multitask operation (It is allowed to conduct a test while browsing previous records)
3. As many as 9 test settings and 20 groups of test results can be stored, and kept in memory in the event of power failure
4. Communication with a PC is available to allow test data storage, analysis and printing to be carried out on the PC, or directly connected to a micro printer
5. The instrument can be powered on or off at ce ain times for testing purpose
6. Column diagram analysis of alarms and error codes
7. Software updating online

 

• Service-interrupted error code testing
• Error code testing online
• Framing and non-framing signals generation and reception
• 2 Mbit/s non-framing error code performance testing
• 2 Mbit/s framing N×64kbit/s channel error code performance testing
• Performance testing of bit error, coding error, frame error, CRC error and E bit error
• Alarm testing of signal loss, AIS alarm, frame remote alarm, multiframe remote alarm, out-of-frame, and out-of-pattern synchronism
• Frequency swing testing
• Line signal level testing
• Speech channel signal level and frequency testing
• Pattern slip testing
• Straightforward signaling
• Audio frequency testing
• Loop circuit time lag testing
• Automatic protection switching time testing (APS)
• Sound monitoring
•Signaling state display, Voice channel content display, Voice channel busy indication
• Column diagram analysis of alarms and error codes
• Time sot content analysis
• Frame content analysis
• G. 821/G. 826/M. 2100 error code performance analysis
• Several kinds of error code and alarm inse ion
• Three input modes (terminating, bridging and monitoring)
• Two clock options (internal and picking-up)
• RS-232 interface for printing result
• Equidirectional 64k testing
• V.24/RS232, V.35, V.36, X.21, RS-449, RS-485, EIA-530 and EIA-530A data testing

 

No.	Item	Qty
1	FS-1200 Series 2M Transmission Analyzers	1 set
Attached files
2	User's manual	1 pc
3	Software disc	1 pc
Attached accessories
4	75ΩCoaxial testing line	1 pc
5	BNC-L9 Testing line CESHIYI	2 pcs
6	RS232 serial line	1 pc
7	Special testing cable of data communication 1(V.24,RS-485,EIA-530,EIA-530A)	1 pc
8	Special testing cable of data communication 2 (RS-449,V.36)	1 pc
9	Special testing cable of data communication 3 (X.21)	1 pc
10	Special testing cable of data communication 4 (V.35)	1 pc
11	G.703 CO special testing cable (64Kb/s coaxial interface)	1 pc
12	Power adapter	1 pc
13	Data self-loop head	1 pc
14	Switch cable	1 pc
15	Handy-case	1 pc
16	Serial printing line (optional)	1 pc

The E1 tester, 2M Error rate tester is designed for 2M bit error rate test, applicable to telecommunication access networks, transmission networks and the sta -up, check and maintenance of optical communications systems. If you are interested in this 2M E1/Datacom Transmission Analyzer FS1200A, welcome to contact us, we also provide one year warranty for it.

2M Technical Index
(1) Signal input rate: 2048kbit/s±100ppm (G.703 requirement±50PPM)
(2) Signal coding: HDB3, AMI.
(3) Input balance response: Attenuation complies with the law of square root of frequency, and is within the range of 0 to 6dB at 1024 kHz.
(4) Input Impedance
(4.1) Unbalance terminating: 75Ω
Balance terminating: 120Ω.
Reflection loss >18dB within 50H~3100kHz.
(4.2) Unbalance bridging: >W750Ω
Balance bridging: >W1200Ω
(4.3) Unbalance monitoring: 75Ω, 26dB gain
Balance monitoring: 120Ω, 26dB gain
Reflection loss >18dB within 50H~ 3100KHz.
(5) Signal structure
(5.1) Non-frame structure
(5.2) Frame structure: PCM30, PCM31, PCM30CRC, PCM31CRC
Frame structure complies with the requirement of G. 704.
(6) Testing pattern: 26-1, 29-1, 211-1, 215-1, 220-1, 223-1, and artificial code
(7) Impedance of output interface:
(7.1) Non-balance 75Ω, up to G. 703
(7.2) Balance: 120Ω, up to G. 703
(8) External clock input
(8.1) Signal form: HDB3, NRZ
(8.2) Balance terminating resistance: 120Ω
Unbalance terminating resistance: 75Ω
Balance bridging resistance: >1200Ω
Unbalance bridging resistance: >750Ω
 
•Power supply
(1) Special power adapter
Input: AC220V 50Hz
Output: DC 9V 1A
(2) Internal rechargeable battery
4000mAh, 6V nickel-hydrogen rechargeable battery
Working time: 8 hours
Charging: 8 hours at power-off state, and 12 hours at power-on state
• Printer: μP40-TS (CH) Chinese character micro-printer with standard level and serial port.
• Dimension : L×W×H: 200×160×42mm
Ambient parameters:
Operation temperature: 0~40℃
Storage Temperature: -30~+70℃
Humidity: 5%~90%, non-condensing

Item	FS-1200A	FS-1200C	FS-1200E
E1 Measurement	Yes	Yes	Yes
Datacom Measurement	No	Yes	Yes
Audio/Listen	Yes	Yes	Yes
Frequency Deviation	No	Yes	Yes
Pulse Mask	No	Yes	Yes
Co directional 64K	Optional	Optional	Yes
Ethernet	Optional	Optional	Yes
Jitter	Optional	Optional	No
Frame Relay	Optional	Optional	Yes
AC Power Adapter	AC220V 50Hz/DC 9V 1A
Rechargeable Batteries	5*1.2V AA NiMH batteries
Operating/Storage Temperature	0℃~50℃/-20~+70℃
Humidity	5%~95% non-condensing
Dimensions/Weight	200*160*42mm/2kg